Holden EK Technical Specifications

Send This Page To A Friend
Fade To White
EK Holden Technical Specifications

EK Holden
Holden Colour Codes A - L
Holden Colour Codes A - L
Holden Colour Codes M -Z
Holden Colour Codes M -Z
  • Years of Manufacture: 1961 - 1962
  • Number Built: 150,214
  • Price at Introduction: £1106 ($2212)
  • Models:
    • Standard Sedan
    • Special Sedan
    • Standard Station Sedan
    • Special Station Sedan
    • Panel Van
    • Utility
  • Date(s) of Introduction:
    • All Models - May, 1961
  • To Identify:
    • Similar body to FB but with wider grille
    • Grille presents with more vertical slats over FB
    • Front turn indicators incorporated into grille surrounds
    • Additional front badge mounted at the top of the grille
  • Body:
    • Unitary construction (Monocoque)
  • Exterior Dimensions:
    • Total Length: 181.8 inches (4617mm)
    • Total width: 67.0 inches (1703mm)
    • Height at kerb weight: 59.9 inches (1521mm)
    • Wheelbase: 105.0 inches (2667mm)
    • Front Track: 54.5 inches (1384mm)
    • Rear Track: 54.5 inches (1384mm)
  • Kerb Weight:
    • Standard Sedan - 2471lb (1121kg)
    • Special Sedan - 2490lb (1129kg)
    • Standard Station Sedan - 2587lb (1173kg)
    • Special Station Sedan - 2606lb (1182kg)
  • Fuel Tank Capacity:
    • 9.5 gallons (43.2 litres)
  • Turning Circle:
    • 37ft (11.3 metres)
  • Instruments:
    • Speedometer
    • Petrol gauge
    • Water temperature warning lamp
    • Oil warning lamp
    • Generator warning lamp
  • Manual Transmission:
    • 1st: 2.99:1 top speed of 28 mph (45 km/h)
    • 2nd: 1.59:1 to top speed of 58 mph (93 km/h)
    • 3rd: 1.00:1 to top speed of 80.2 mph (129 km/h)
    • Reverse: 2.99:1
  • Hydramatic Automatic Transmission:
    • 1st: 3.639:1
    • 2nd: 1.5775:1
    • 3rd: 1.00:1
    • Reverse: 3.57 to 2.516:1
  • Clutch:
    • Single dry plate
  • Rear Axle Ratio:
    • 3.888:1
  • Engine/Transmission Combinations:
    • Standard six-cylinder engine and three speed manual or three speed Hydramatic automatic
  • 0-60 mph (0-97 km/h):
    • 20.4 seconds
  • Standing Quarter Mile (400 metres):
    • 22.0 seconds
  • Engine:
    • Capacity: 2260cc 138 cubic inches (2.262 litres)
    • Type: Conventional, watercooled four stroke, reciprocating piston type with 6 cylinders
    • Configuration: Front mounted, longitudinal, inline
    • Head: Pushrod and rocker actuated ohv with two valves per cylinder
    • Fuel System: One downdraft Bendix Stromberg carburettor
    • Bore and Stroke: 3.062 x 3.125 inches (78 x 79mm)
    • Power: 75bhp (56kw) at 4200rpm
    • Torque: 120lb-ft (163Nm) at 1400rpm
    • Compression Ratio: 7.25:1
  • Ignition and Electrical:
    • 12 volt
    • Coil and distributor
    • Distributor automatic centrifugal and vacuum-type advance control
    • Octane selector
  • Exhaust:
    • Welded steel tube with full bore, reverse flow type muffler
  • Suspension:
    • Front: Short and long arm independent type. GMH Delco direct acting tubular telescopic shocks
    • Rear: Hotchkiss Drive with semi-elliptic springs, four leaves (or six for the Station Sedans). GMH Delco direct acting tubular telescopic shocks.
  • Steering:
    • Recirculating ball type, ratio 16.3:1
  • Brakes:
    • Four wheel hydraulic
    • Handbrake operating mechanically on rear wheels
  • Wheels:
    • Demountable disc wheels with drop centre type rim integral with wheel
  • Tyres:
    • Tubeless low pressure balloon 6.40x13 four-ply.
EK Holden Wagon
Latest Classic Car Classifieds

You may also like...