Unique Car Sales



Australian Classic Cars


Unique Cars and Parts on Facebook

Classic Cars for Sale
RSS Feed From Unique Cars and Parts Classifieds


Holden FC Technical Specifications

Send This Page To A Friend
FC Holden Specifications

FC Holden Station Sedan
Holden Colour Codes A - L
Holden Colour Codes A - L
Holden Colour Codes M -Z
Holden Colour Codes M -Z
  • Years of Manufacture: 1958 - 1960
  • Number Built: 191,724
  • Price at Introduction: £1110 ($2220)
  • Models:
    • Standard Sedan
    • Business Sedan
    • Special Sedan
    • Standard Station Wagon
    • Special Station Wagon
    • Panel Van
    • Utility
  • Date(s) of Introduction:
    • All Models - 6th May, 1958
  • To Identify:
    • Similar body to FE but with addition of front turn indicators incorporated into bottom edge of wider hatched grille
  • Body:
    • Unitary construction (Monocoque)
  • Exterior Dimensions:
    • Total Length: 176.7 inches (4488mm)
    • Total width: 66.9 inches (1699mm)
    • Height at kerb weight: 61.0 inches (1549mm)
    • Wheelbase: 105.0 inches (2667mm)
    • Front Track: 54.5 inches (1384mm)
    • Rear Track: 54.5 inches (1384mm)
  • Kerb Weight:
    • Standard Sedan - 2389lb (1084kg)
    • Special Sedan - 2412lb (1094kg)
    • Standard Station Wagon - 2517lb (1142kg)
    • Special Station Wagon - 2533lb (1149kg)
    • Panel Van - 2415lb (1095kg)
    • Utility - 2393lb (1085kg)
  • Fuel Tank Capacity:
    • 9.5 gallons (43.2 litres)
  • Turning Circle:
    • 36.5ft (11.1 metres)
  • Instruments:
    • Speedometer
    • Petrol gauge
    • Water temperature warning lamp
    • Oil warning lamp
    • Generator warning lamp
  • Transmission:
    • 1st: 2.98:1 to top speed of 34 mph (55 km/h)
    • 2nd: 1.59:1 to top speed of 55 mph (89 km/h)
    • 3rd: 1.00:1 to top speed of 85.7 mph (138 km/h)
    • Reverse: 2.98:1
  • Clutch:
    • Diaphragm type spring, Single-plate, dry disc, Hydraulically controlled
  • Rear Axle Ratio:
    • 3.888:1
  • Engine/Transmission Combinations:
    • Standard six-cylinder engine and three speed manual
  • 0-60 mph (0-97 km/h):
    • 19.6 seconds
  • Standing Quarter Mile (400 metres):
    • 21.6 seconds
  • Engine:
    • Capacity: 2160cc 132.5 cubic inches (2.171 litres)
    • Type: Conventional, watercooled four stroke, reciprocating piston type with 6 cylinders
    • Configuration: Front mounted, longitudinal, inline
    • Head: Pushrod and rocker actuated ohv with two valves per cylinder
    • Fuel System: Stromberg double venturi downdraft type carburettor, AC mechanical fuel pump
    • Bore and Stroke: 3.00 x 3.125 inches (76.2 x 79.4mm)
    • Power: 72bhp (54kw) at 4000rpm
    • Torque: 110lb-ft (149Nm) at 1200rpm
    • Compression Ratio: 7:1
  • Ignition and Electrical:
    • 12 volt
    • Coil and generator
  • Exhaust:
    • Single tail-pipe, oval shaped, full bore, reverse flow type muffler
  • Suspension:
    • Front: Short and long arm independent type assembled to front end frame as a single unit. GMH Delco direct acting tubular telescopic shocks
    • Rear: Hotchkiss Drive with semi-elliptic springs, four leaves (or five for the Business Sedan and Station Sedans). Tension shackles with rubber bushings. GMH Delco direct acting tubular telescopic shocks.
  • Steering:
    • Recirculating ball type, ratio 14:1
  • Brakes:
    • Front: Hydraulic 9 inch (229mm) drums
    • Rear: Hydraulic 9 inch (229mm) drums
  • Wheels:
    • Demountable disc wheels with drop centre type rim integral with wheel
  • Tyres:
    • Tubeless low pressure balloon 6.40x13 four-ply
Latest Classic Car Classifieds

back
Unique Cars and Parts - The Ultimate Classic Car Resource
next