|
|
|
Specifications: 1954 Rover 75 P4 series |
|
|
|
|
|
|
|
Manufacturer: |
|
Rover |
Country of Origin: |
|
UK |
Designer: |
|
n/a |
Years of Manufacture: |
|
1954 |
Date of Introduction: |
|
n/a |
Number Built: |
|
n/a |
Price at Introduction: |
|
n/a |
Models: |
|
n/a |
To Identify: |
|
n/a |
RAC Rating: |
|
19.8 |
|
Body Type: |
|
Sedan / Saloon
No. of Doors: |
|
4 |
Front Track: |
|
1321, 52 |
Rear Track: |
|
1308, 51.5 |
|
Total Length: |
|
4530, 178.3 |
Total Width: |
|
1667, 65.6 |
Height at Kerb Weight: |
|
1619, 63.7 |
Wheelbase: |
|
2820, 111 |
Length Wheelbase Ratio: |
|
1.61 |
Ground Clearance: |
|
181, 7.1 |
Kerb Weight: |
|
1484 Kg, 3272 Lb |
Weight Distribution (Front): |
|
n/a |
|
Capacity: |
|
2.2 Litre, 2230cc (136.083 cu in) |
Type: |
|
6 Cylinder, OISE, 2 Valves Per Cylinder, 12 Valves in Total |
Configuration: |
|
Front, Longitudinal |
Sump: |
|
n/a |
Fuel System: |
|
1 x <a href="/how_to_repair_su_carburettor.htm" target="_self">SU Carburettor</a> |
Head: |
|
n/a |
Bore & Stroke: |
|
73 × 88.9 mm, 2.87 × 3.5 in |
Bore/stroke Ratio: |
|
0.82 |
Power: |
|
81.1 PS (80 bhp) (59.7 kW) at 4500 rpm |
Specific Output : |
|
35.9 bhp per litre, 0.59 bhp per cubic inch |
Torque: |
|
153 Nm (113 ft·lb) (15.6 kgm) at 1750 rpm |
Specific Torque: |
|
68.61 Nm/litre |
Bmep: |
|
862.2 kPa (125 psi) |
Compression Ratio: |
|
7.2:1 |
Fuel Capacity: |
|
52.3 Litres, 11.5 UK Gal, 13.8 US Gal |
Unitary Capacity: |
|
371.67 |
Coolant: |
|
Water |
Intercooler: |
|
n/a |
Aspiration: |
|
Normal |
Compressor Type: |
|
n/a |
Ignition and Electrical: |
|
n/a |
Exhaust: |
|
n/a |
Catalytic Converter: |
|
No |
Main Bearings: |
|
4 |
|
Transmission: |
|
4 Speed Manual With Overdrive |
Manual, 4 speed floor mounted: |
|
n/a |
Automatic, 3 speed floor mounted T-Bar: |
|
n/a |
Final drive ratio: |
|
4.70 |
Drive: |
|
Rear Wheel Drive |
|
0-50 mph (80 km/h): |
|
n/a |
0-60 mph (100 km/h): |
|
n/a |
0-100 mph (161 km/h): |
|
n/a |
Standing ¼ mile: |
|
n/a |
Standing Km: |
|
n/a |
Top speed: |
|
n/a |
Fuel Consumption: |
|
n/a |
CO2 Emissions: |
|
n/a |
Power-to-weight: |
|
53.91 bhp/ton |
|
Brake Type: |
|
Drum Front / Rear Drum Brakes |
Front: |
|
n/a |
Rear: |
|
n/a |
Park Brake: |
|
n/a |
Steering: |
|
Recirculating Ball Steering |
Turns Lock-to-Lock: |
|
3.800 |
Top Gear Ratio: |
|
0.77 |
Turning Circle: |
|
11.30 m |
|
Front Suspension: |
|
Independent Suspension / Coil Springs |
Rear Suspension: |
|
Live Axle / Semi-Eliptic Leaf Springs |
Wheels: |
|
|
Front: |
|
n/a |
Rear: |
|
n/a |
Tyres : |
|
|
Front: |
|
n/a |
Rear: |
|
n/a |
|
Instruments: |
|
n/a |
|
Rover P4
The Rover P4 series was a group of saloon automobiles produced from 1949 through to 1964 designed by Gordon Bashford. The P4 designation is factory terminology for the group of cars and was not in day-to-day use by ordinary owners, who would have said simply that they had a "Rover 90" and so on.
The P4 was also the basis of the short lived Marauder car. The P4 was also the basis of the short lived Marauder car.
Engineering
The cars used a Rover engine in 4- or 6-cylinder form which came from the 1948 P3 and had overhead Valves for inlet and side Valves for exhaust. A four-speed manual transmission was used with a column-mounted shifter at first and floor-mounted unit from 1954. At first the gearbox only had synchromesh on third and top but it was added to second gear as well in 1953. A freewheel clutch, a traditional Rover feature, was fitted to cars without overdrive until mid-1959, when it was removed from the specifications, shortly before the range rearrangements announced for the London Motor Show in October that year. The cars had a separate chassis with Independent suspension by Coil Springs at the front and a live axle with half-elliptical leaf springs at the rear. The brakes on early cars were operated by a hybrid hydro-mechanical system but became fully hydraulic in 1950. Girling disc brakes replaced drums at the front from 1959. The complete body shells were made by the Pressed Steel company and featured aluminium/magnesium alloy (Birmabright) doors, boot lid and bonnets until the final 95/110 models, which were all steel to reduce costs. The P4 was one of the last UK cars to incorporate rear-hinged "suicide" doors..
P4 75
An updated P4 75 arrived in 1954 with some styling changes. A three-piece wraparound rear window was used, but the 2.1 litres (130 cu in) IOE engine continued. This model was updated again in 1955 with a larger 2.2 L (2230cc/136 in³) version of the IOE engine. Overdrive became an option from 1956. In 1957, it was restyled, along with the rest of the P4 line, with a new grille and wings. Production ended in 1959 with the introduction of the P4 100.
Also see: Rover Reviews | The History of Rover
|
|
|
|
|