- Years of Manufacture: 1966 - 1972
- Number Built: 80,000 + (all models)
- Models:
- 1300 (Standard)
- 1600 (Optional)
- GT
- Date of Introduction:
- To Identify:
- Squared off tail lamp assembly
- Indicators integrated into front grille
- Body:
- Unitary construction (Monocoque)
- Exterior Dimensions:
- Total Length: 168.0 inches (4267mm)
- Total width: 64.9 inches (1648mm)
- Height at kerb weight: 54.7 inches
(1389mm)
- Wheelbase: 98.0 inches (2489mm)
- Front Track: 52.5 inches (1333mm)
- Rear Track: 51.0 inches (1295mm)
- Kerb Weight:
- 1300: 1931 lb (876 kg)
- 1600: 1971 lb (894 kg)
- GT: 2001 lb (908 kg)
- Fuel Tank:
- Turning Circle:
- Instruments:
- Speedometer
- Petrol gauge
- Temp warning lamp
- Oil pressure warning lamp
- Ammeter warning lamp
- Handbrake warning lamp
- High-beam warning lamp
- GT standard with
- Tachometer
- Temp gauge
- Oil gauge
- Ammeter gauge
- Optional Equipment:
- 3 speed auto (220,240 and 440)
- 1600 engine (220,240 and 440)
- Whitewall or radial ply tyres (Note: Radial tyres standard on GT)
- Manual or Push-Button radio
- Fan kit for heater demister
- Tinted Laminated windscreen
- Full wheel covers
- Transmission:
- Manual (1300 and 1600 models):
- 1st: 3.54:1
- 2nd: 2.39:1
- 3rd: 1.41:1
- 4th: 1.00:1
- Reverse: 3.96:1
- Manual (GT):
- 1st: 2.97:1
- 2nd: 2.01:1
- 3rd: 1.39:1
- 4th: 1.00:1
- Reverse: 3.32:1
- Automatic (3 speed)
- 1st: 2.39:1
- 2nd: 1.45:1
- 3rd: 1.00:1
- Reverse: 2.09:1
- Clutch:
- Diaphragm spring clutch
- Clutch diameter: 7.54"
- Friction area: 44.17 sq. ins.
- Rear Axle Ratio:
- Semi-floating hypoid
- 1300: 4.444:1
- 1600: 4.125:1
- GT: 3.90:1
|
- 1300:
- Capacity: 1298cc / 79.2ci
- Type: Conventional, watercooled four
stroke, reciprocating piston type,
4 cylinders, OHV Cross-Flow Bowl-In-Piston featuring 5 main bearing crank-shaft, with integral weights dynamically balanced
- Configuration: Front mounted, longitudinal,
inline
- Head: Pushrod and rocker actuated ohv
with two valves per cylinder
- Fuel System: Single throat
downdraft type carburettor
- Bore and Stroke: 3.18 x 2.48 inches
(80.772 x 62.992mm)
- Power: 61.5bhp (46 kW) at 5000rpm
- Torque: 75.5lb-ft (Nm) at 2500rpm
- Compression Ratio: 9.0:1
- 1600:
- Capacity: 1598cc / 97.5ci
- Type: Conventional, watercooled four
stroke, reciprocating piston type,
4 cylinders, OHV Cross-Flow Bowl-In-Piston featuring 5 main bearing crank-shaft, with integral weights dynamically balanced
- Configuration: Front mounted, longitudinal,
inline
- Head: Pushrod and rocker actuated ohv
with two valves per cylinder
- Fuel System: Single throat
downdraft type carburettor
- Bore and Stroke: 3.18 x 3.05 inches
(80.772 x 77.47mm)
- Power: 75.0bhp (56 kW) at 5000rpm
- Torque: 97.0lb-ft (Nm) at 2500rpm
- Compression Ratio: 9.0:1
- GT:
- Capacity: 1598cc / 97.5ci
- Type: Conventional, watercooled four
stroke, reciprocating piston type,
4 cylinders, OHV Cross-Flow Bowl-In-Piston featuring 5 main bearing crank-shaft, with integral weights dynamically balanced
- Configuration: Front mounted, longitudinal,
inline
- Head: Pushrod and rocker actuated ohv
with two valves per cylinder
- Fuel System: Dual barrel Weber
downdraft type carburettor
- Bore and Stroke: 3.18 x 3.05 inches
(80.772 x 77.47mm)
- Power: 93.0bhp (69 kW) at 5400rpm
- Torque: 101.5lb-ft (Nm) at 3600rpm
- Compression Ratio: 9.0:1
- Ignition and Electrical:
- 12 volt
- Coil and alternator
- Exhaust:
- Suspension:
- Front: Independent
type, directly operated coil springs mounted on special double-acting hydraulic shock absorbers, integral with wheel spindle and located on body in rubber mounted uper bearing. Anti roll torsion bar embodied
- Rear (1300 and 1600): Longitudinal, asymetrical semi-elliptic springs with hydraulic double-acting telescopic shock absorbers
- Rear (GT): Longitudinal, asymetrical semi-elliptic springs with radius arms. Hydraulic double-acting telescopic shock absorbers
- Steering:
- High efficiency, recirculating ball type, ratio 15.7:1
- Brakes:
- Self adjusting front disc brakes on all models
- Front
- 1300 and 1600: 9.5 inch (241mm) dia x 0.38" thick disc, swept area 172 sq. ins
- GT: 9.62 inch (244mm) dia x 0.50" thick disc, swept area 189.5 sq. ins
- Rear:
- 1300 and 1600: Self adjusting, 8 inch (203mm) dia. x 1.5 inch (38mm) wide, swept area 75.5 sq. ins
- GT: Self adjusting, 9 inch (229mm) dia. x 1.75 inch (44mm) wide, swept area 98.9 sq. ins
- Wheels:
- 1300 and 1600: 13" 4J Pressed steel disc wheels with safety rims
- GT: 13" 5J Pressed steel disc wheels with safety rims
- Tyres:
- 1300: 5.20 x 13 4 ply tubless, radial optional
- 1600: 5.60 x 13 4 ply tubless, radial optional
- GT: 165 x 13 radial ply
- Whitewall tyres optional on all models except GT
- 165 x 13 radial ply on 5J wheels option on all models, standard on GT
Also see:
Cortina Mk.II Model Lineup
Cortina Mk.II GT Review
Cortina Mk.II Brochure
|
