Lancia Flavia Technical Specifications

Send This Page To A Friend
Fade To White
Lancia Flavia
Lancia Colour Codes
Lancia Colour Codes

Small Window Click picture for close up view
Lancia Flavia

  • Years of Manufacture: 1960 - 1970
  • Number Built: n/a
  • Price at Introduction: n/a
  • Date of Introduction:
    • 1960
  • Chassis/Body:
    • Integral with steel body, subframes for suspension
  • Kerb Weight:
    • n/a
  • Fuel Tank:
    • 12 gallons / 55 litres
    • Minimum octane ratin 97RM
  • Turning Circle:
    • 38 ft 11 in.
  • Instruments:
    • Speedometer (with integral tripmeter and odometer)
    • Tachometer
    • Petrol gauge
    • Temp gauge
    • Ammeter gauge
    • Oil gauge
  • Transmission:
    • Manual - 4 Speed all synchromesh, in unit with final drive
    • 1st: 3.33:1 to 33 mph (53 km/h)
    • 2nd: 1.97:1 to 56 mph (90 km/h)
    • 3rd: 1.39:1 to 79 mph (127 km/h)
    • 4th: 1.0:1 to 103 mph (166 km/h)
    • Reverse: 3.71:1
  • Clutch:
    • Fichtel and Sachs single dry plate with integral torsional damper
  • Rear Axle Ratio:
    • Hypoid bevel differential, final drive 3.91:1
  • Maximum Speed:
    • 103 mph
  • Fuel Consumption:
    • 24 mpg
  • Performance:
    • 0 - 60 mph:
  • Engine (Flat 4):
    • Capacity: 1800cc
    • Type: Watercooled four stroke, reciprocating piston type with 4 cylinders
    • Configuration: Front mounted, horizontally opposed
    • Head: Pushrod and rocker actuated ohv with two valves per cylinder, two camshafts
    • Fuel System: Kugelfischer port-type fuel injection
    • Bore and Stroke: 3.46" (88mm) x 2.91" (74mm)
    • Power: 102 bhp @ 5200 rpm
    • Torque: 112.7 ft. lb. @ 3,500 rpm
    • Compression Ratio: 9.0:1
  • Ignition and Electrical:
    • 12 volt 42 amp. hr. battery
    • Coil and alternator
    • Four headlamp system, sealed filament outer, iodine vapour main beam inner, 110/220 watt
    • 11 Electrical fuses, located in cabin
  • Exhaust:
    • Single tail-pipe
  • Suspension:
    • Front: Independent transverse half elliptic leaf springs, wishbones, anti-roll bar, telescopic dampers
    • Rear: Dead beam axle, half elliptic leaf ssprings, Panhard rod, anti-roll bar, telescopic dampers
  • Steering:
    • Worm and roller
  • Brakes:
    • ATE Disc front and rear, separate hydraulic circuits front and rear
    • Servo: Vacuum
    • Front: 11.02 inch, diameter, 248 sq. in.
    • Rear: 11.02 inch, diameter, 248 sq. in.
    • Total 496 sq. in. (363 sq. in./ton laden)
    • Parking brake mechanically operated on rear wheels
  • Wheels:
    • Pressed steel disc wheels, 4 stud pattern
    • 5" wide rim
  • Tyres:
    • Michelin XAS Radial Ply 165 x 15mm
Lancia Flavia Interior
Latest Classic Car Classifieds


Sell Your Car or Parts Browse the Classifieds It's Absolutely Free! - Find Out More